Brother Printer Setup & Troubleshooting Guide
Brother manufactures reliable laser and inkjet printers for home and office use, including the HL, MFC, DCP, and ADS series. This guide provides step-by-step instructions for wireless setup, driver installation, and resolving common Brother printer issues.
Popular Brother Printer Models
- Brother HL-L2350DW
- Brother MFC-L2750DW
- Brother HL-L3270CDW
- Brother MFC-J995DW
- Brother DCP-L2550DW
- Brother HL-L5200DW
How to Connect Brother Printer to Wi-Fi
Follow these steps to connect your Brother printer to your wireless network.
- 1
Power on the Brother printer
Press the power button and wait for the printer to complete initialization.
- 2
Access Network settings
Press the Menu button on the control panel. Navigate using the arrow keys to Network, press OK. Select WLAN (for wireless LAN).
- 3
Start Setup Wizard
Select Setup Wizard from the WLAN menu. When asked if you want to enable wireless, select Yes.
- 4
Select your Wi-Fi network
Use the arrow keys to scroll through the detected networks and select your Wi-Fi network name.
- 5
Enter your Wi-Fi password
Enter your Wi-Fi password using the printer keypad. Hold a key to cycle through characters. Press OK when done.
- 6
Confirm and complete setup
The display will show 'Connected' when the Brother printer joins your Wi-Fi network.
Brother Printer Driver Installation
Download and install the correct Brother driver for your operating system.
- 1
Go to Brother Support
Open your browser and navigate to support.brother.com.
- 2
Search your Brother model
Enter your printer model number (e.g., HL-L2350DW, MFC-J995DW) in the model search field.
- 3
Select your operating system
Choose your OS from the dropdown. Brother provides drivers for Windows 10, Windows 11, macOS, and various Linux distributions.
- 4
Download Full Driver & Software Package
Click on Downloads. Download the Full Driver & Software Package.
- 5
Run the Brother installer
Open the installer file. Accept the license agreement. When prompted for connection type, select Wireless Network Connection.
- 6
Select printer and finish
Select your Brother printer from the detected devices list. Follow the remaining prompts to complete installation.
Common Brother Printer Issues & Fixes
Quick solutions for the most frequently reported Brother printer problems.
Brother Printer Shows Offline
Restart the Brother printer and your computer. In Windows, open the print queue for the Brother printer and uncheck 'Use Printer Offline' under the Printer menu.
Drum Unit Replace Warning
This warning appears after approximately 12,000 pages. If the drum is new or recently replaced, reset the drum counter: open the front cover, press and hold the OK button for 4 seconds.
Toner Low on New Cartridge
Open the front cover and close it again to trigger re-detection. If the message persists, remove the cartridge, rock it gently side-to-side to distribute toner evenly, and reinsert it.
Cannot Connect to 5GHz Wi-Fi
Brother laser printers (HL and MFC series) support only 2.4GHz Wi-Fi networks. Separate the 2.4GHz and 5GHz networks in your router settings.
Brother Printer Setup Guides
Step-by-step guides to help you set up, connect, and troubleshoot your Brother printer.
Brother Printer — Frequently Asked Questions
Common questions about setting up and troubleshooting Brother printers.
How do I connect my Brother printer to Wi-Fi?
To connect a Brother printer to Wi-Fi: press the Menu button, navigate to Network > WLAN > Setup Wizard, select your Wi-Fi network name, and enter the password. The display will show 'Connected' when successful.
How do I download Brother printer drivers?
Download Brother printer drivers from support.brother.com. Select your country, search for your printer model, choose your operating system, and download the Full Driver & Software Package.
Why does my Brother printer show as offline?
A Brother printer showing offline is often caused by a communication error. Try these fixes: restart the printer and computer. On Windows, go to Printers & Scanners and uncheck 'Use Printer Offline.'
How do I reset my Brother printer to factory settings?
To factory reset a Brother printer: press Menu, navigate to Initial Setup > Reset > All Settings > Yes > Yes. This clears all network settings and custom settings.
Need Help With Your Brother Printer?
Browse all Brother setup guides and troubleshooting resources.